Fender Deluxe Telecaster+SRV’s+Bigsby Style Trem+Custom Neck-Modified By Haywire Custom Guitars
Haywire Custom Guitars Inc. Home of the “Gig Ready” Guitar!Instruments for Professionals
We Ship World Wide!Custom Shop
Modified Fender Black
Deluxe Bigsby Style Telecaster very slightly used
+
New Gloss finish
+
Comfort Cut body contour in back
+
New-Special SRV
Neck and Bridge pickups!
+
Bigsby Style Tremolo System
+
Custom neck installed
+
all frets leveled and re-crowned
fret ends dressed for a broken in feel
Fret size: Dunlop 6150 Nut width: 1-11/16
Haywire Custom Shop All Maple Neck includes:
New Tuners, Nut, Strings and Full Set-Up
Low action and intonation set just right
Variable Treble Bleed Circuit included:
This mod keeps the tone you have on “10” throughout the entire range of the volume control.
We add a resistor capacitor network to the input and output of the volume control to
keep the highs from leaving your tone as the volume is decreased.
By adding this circuit we can help you avoid the “muddy-tone” syndrome.
Now your tone is much more controllable and articulate!
Variable tone treble Bleed circuit has been installed for you.
The Haywire Treble Bleed Circuit is included:
The Treble Bleed is hand-soldered here in our shop: between the input and output lugs of your guitar volume control pot, to smooth out treble bleed.
Get uniform tone from 1 to 10, and a more rounded and concise audio at low volume.
Turning the volume control applies varying amounts of a specially tuned high frequency filter to ALL pickups.
Now each pickup has the ability to produce a stronger, fuller tone and 50% less noise.
On Humbuckers (either North or South or both coils can be filtered).
This variable treble bleed circuit is now installed
This variable treble bleed/bypass circuit corrects the problem of high frequency losses
provides auto-adjustment of tone at reduced volumes and improves audio taper between 3 and 10.
Featuring:
specially voiced selected custom guitar pickups that deliver
masterful tone, overdrive, clarity,
dynamics, transparency, versatility & balanced tonal response.
Black Pick Guard, 3 way switching and 6 Saddle T-O-M Bridge
SRV Bridge Pickup
It has a fat, rich bottom, with strong, clear mids
New SRV Bridge Pickup Added
Brand New! SRV Neck Pickup Added
**Deluxe Tele with New Electronics**
Custom finished Telecaster …..Professional Setup
Deluxe Refinished Fender Tele body
This Body is in Perfect Shape and will fit
Fender and Warmoth 21 fret necks!
This NEW TELECASTER Loaded Body is **Ash**
The body finish is New!All hardware, pickups,strap knobs, electronics, switch
A Treble Bleed modification ADDED-It allows you allows you to roll off your volume without losing the highs.Would you like being able to use the volume control… without sacrificing tone?
Now You Can… with a Treble Bleed Circuit Mod added on this guitar!
As you turn your guitar’s volume down, the pot allows some of the current to go to ground as opposed to the output.
The frequencies that leave first are the highs, which leave the tone muddy and obscured without an “edge” on it to a discerning ear.
Avoid this by using our: Haywire Treble Bleed Circuit
This circuit is now installed. You’ll now have uniform tone from 1 to 10, and a more rounded sound at low volume.
It prevents the treble frequencies from bleeding off.
It allows the treble frequencies to be re-introduced into the output for clarity and improved timbre.
At Haywire we simply install a Treble Bleed Circuit capacitor.
We build them in our custom guitars for a better Low and High sound spectrum:
1-error-correction of signals with enhanced clarity
2- preserve high end frequencies
3-improved taper when rolling back your volume control
Get more uniform tone from 1 to 10, and a more rounded sound at low volume.
The neck is styled after the Les Paul 1959 Roundback
59 Roundback
Similar to: 1959 Gibson® Les Paul®
Thickness at 1st Fret: .860″
Thickness at 12th Fret: .960″
The 59 Roundback is based on early Les Paul® neck dimensions.
It is also the neck profile most similar to the PRS® neck shape.
This Guitar Neck
Fingerboard Radius is 12′”
To contact the listing author, send an email to haywire@sccoast.net