Voice Mail

With HTC’s Voice Mail, your calls will always be answered. Whenever you’re on the phone or unavailable to answer a call, your calls may be forwarded automatically to Voice Mail. Callers will hear your personal greeting, after which they can leave their own message.

Yes.  HTC also offers multiple mailboxes under one telephone number. These are mailboxes that branch off of a Primary Mailbox to provide businesses with the option of adding additional mailboxes much like a voice mail system would and provide residential users with the ability to provide family members with their own individual mailbox… all under one telephone number.

Voice Mail Basic features:

– Answer messages sent by another user
– Give messages to another user
– Record or change your personal greeting
– Log in while your greeting is being played
– Receive outside caller messages
– Get notification promptly if a new message arrives while logged into system
– Play, keep, or discard messages
– Automatically tell the time and date of each message
– Access your mailbox from any touchtone telephone
– Message notification

Voice Mail Plus features:

– Answer messages sent by another user
– Give messages to another user
– Record or change your personal greeting
– Log in while your greeting is being played
– Receive outside caller messages
– Get notification promptly if a new message arrives while logged into system
– Play, keep, or discard messages
– Automatically tell the time and date of each message
– Access your mailbox from any touchtone telephone
– Message notification
– Message distribution
– Allows you to mark messages as “private”
– Allows you to flag messages as “priority”
– Allows for verification that sent messages have been received
– Allows for future delivery of messages

To set up your voice mailbox for the first time:

1. Call from the number on which you are setting up your voice mailbox:
2. Dial your voice mail access number.  Find access numbers here.
3. You will be prompted to change your default pin code. (Must be non-sequential and non-repetitive)
4. Add the new pin code of your choice (4 to 8 digits), followed by the “#” key. Next, you are prompted to record your name. This is used when greeting your callers or when you leave messages for others:
5. Record your name and press “#” when finished. An announcement plays your recording back to you.
6. If you want to re-record it, press “1”.
7. If you want to keep it, press “#”.

To set up your greeting:
1. Once you have successfully recorded your name, you are prompted to select a greeting. You can use a number of different types of greetings.
2. To record your own personal greeting, press “1”. Then record your personal greeting, pressing “#” when finished.
3. To use a system-generated greeting that announces your recorded name, press “2”.
4. To use a system-generated greeting that reads out your phone number, press “3”.
5. To use a system-generated greeting that neither announces your name nor reads out your phone number, press “4”. An announcement plays back your selected greeting.
6. To record or select a different greeting, press “1”.
7. To save it and use it as your greeting, press “#”.
8. Once you have finished, you are transferred to the Main Menu.

Note:
After this initial setup, you can access the system from any phone by dialing your voice mail access number and entering your 10-digit voice mailbox phone number, entering your pin code, followed by the “#” key.

To access messages when calling from the telephone number your voice mailbox is set up on:
1. Dial your voice mail access number.
2. Enter pin code, followed by the “#” key. You will be in the Main Menu.
3. Press “1” in order to get in the Listen to Messages Menu.

To access messages when you are calling from another location:
1. Dial your voice mail access number & enter your 10-digit voice mailbox phone number.
2. Enter pin code, followed by the # key. You will be in the Main Menu.
3. Press 1 in order to get in the Listen to Messages Menu.

To set up your group voice mailbox for the first time calling from the number on which you are setting up your voice mailbox:

1. Dial your voice mail access number.
2. You will be prompted to change your default pin code. (Must be non-sequential and non-repetitive)
3. Add the new pin code of your choice (4 to 8 digits), followed by the “#” key. Next, you are prompted to record your name. This is used when greeting your callers or when you leave messages for others:
4. Record your name and press “#” when finished. An announcement plays your recording back to you.
5. If you want to re-record it, press “1”.
6. If you want to keep it, press “#”.

To set up your greeting:
1. Once you have successfully recorded your name, you are prompted to select a greeting. You can use a number of different types of greetings.
2. To record your own personal greeting, press “1”. Then record your personal greeting, pressing “#” when finished.
3. To use a system-generated greeting that announces your recorded name, press “2”.
4. To use a system-generated greeting that reads out your phone number, press “3”.
5. To use a system-generated greeting that neither announces your name nor reads out your phone number, press “4”. An announcement plays back your selected greeting.
6. To record or select a different greeting, press “1”.
7. To save it and use it as your greeting, press “#”.
8. To work with your secondary mailboxes, press “4” from the Mailbox Settings Menu.

To add a new secondary mailbox:
1. Press “3” from the Group Mailbox Settings Menu. An announcement states that a new mailbox has been created and states its new number.
2. To repeat the announcement, press “1”.
3. To return to the previous menu, accepting any changes, press “*”.
4. The new mailbox is automatically enabled and ready to accept incoming voice mails. When it is first created, the new mailbox will use a system-generated greeting that does not use the number or the recorded name. The secondary subscriber can then personalize the mailbox.

To disable a secondary mailbox:
1. Press “2” from the Group Mailbox Settings Menu. An announcement states the total number of mailboxes and then reads out each mailbox number in turn.
2. To select a number, press “1”.
3. To move to the next number, press “#”.
4. To exit without making any changes, press “*”.
5. Once you have selected a number, an announcement states the number you have selected.
6. To disable the selected number, press “1”.
7. To continue to the next number without making any changes, press “2”.
8. To exit the menu without making any changes, press “*”.

To enable a secondary mailbox:
1. Press “1” from the Group Mailbox Settings Menu. An announcement states the total number of mailboxes waiting to be enabled, and then reads out each available number in turn.
2. To select a number, press “1”.
3. To move to the next number, press “#”
4. To exit without making any changes, press” *”.
5. Once you have selected a number, an announcement states the number you have selected.
6. To enable the selected number, press “1”.
7. To continue to the next number without making any changes, press “2”.
8. To exit the menu without making any changes, press” *”.

To delete a secondary mailbox:

1. Press “4” from the Group Mailbox Settings Menu. An announcement states the total number of mailboxes and then reads out each mailbox number in turn.
2. To select a number, press “1”.
3. To move to the next number, press “#”.
4. To exit without making any changes, press “*”.
5. Once you have selected a number, an announcement states the number you have selected.
6. To delete the selected number, press “1”.
7. To continue to the next number without making any changes, press “2”.
8. To exit the menu without making any changes, press “*”.

Calling Features

Anonymous Call Rejection allows you to “deny” any calls from ringing the line if the calling party has blocked the identification number. The calling party receives a message that the call is not being accepted due to the identification block.

To activate Anonymous Call Rejection:
1. Lift the receiver and listen for dial tone.
2. Dial “*77”.
3. Listen for confirmation tone, hang up.

To de-activate Anonymous Call Rejection:
1. Lift the receiver and listen for dial tone.
2. Dial “*87”.
3. Listen for confirmation tone, hang up.

Automatic Busy Redial lets you avoid the hassle of having to redial a number over and over again because the line is busy. Automatic Busy Redial will keep trying to reach your party for up to 30 minutes and will ring you back when their line is free. Available On A Pay-Per-Use Basis.

To use Automatic Busy Redial:

1. When you hear a busy signal, hang up, then lift the receiver and listen for a dial tone.
2. Press “*66”.
3. If the line is still busy:
– Hang up.
– Your phone will check the number for up to 30 minutes.
– You will hear a special ringing when the line is free.
– Your call will automatically be made when you lift the handset.
4. If the line is not busy, your call will be put through.

To cancel Automatic Busy Redial:
1. Press “*86” and listen for the announcement, hang up.

Notes:
When Automatic Busy Redial is activated; you may still make and receive phone calls. You can use Automatic Busy Redial for more than one busy number at a time. You will hear a special ringing when one of these numbers becomes idle, but you will not be able to tell which of the numbers is ringing back. If the number you are trying to reach is outside the area served by Automatic Busy Redial, you will hear a recording advising you that the call cannot be made.

Automatic Call Return will return your call to the last person who called or attempted to call you but failed to get an answer. Available On A Pay-Per-Use Basis

To use Automatic Call Return:

1. Pick up the handset and listen for dial tone.
2. Press “*69”.
3. Listen for an announcement that will tell you the phone number of the party who last called you. The phone number will not be announced if the caller chose to block the delivery of his phone number. If the number was blocked, the call cannot be returned, as mandated by the FCC.
4. If you wish to return the call:
– Press “1”.
– Listen for ringing.
– Wait for answer.
5. If you do not wish to return the call, hang up.
6. If electing to return the call and the line is busy:
– Listen for the tone or announcement telling you the number is busy.
– Hang up.
– You will hear special ringing when the line is free.
– Your call will automatically be made when you lift the handset.

To cancel Automatic Call Return:
1. Press “*89”.
2. Listen to announcement and hang up.

Notes:
If the number you are trying to reach is outside the area served by Automatic Call Return, you will hear a recording advising you that the call cannot be made. After a call during which you heard a call waiting tone, you can use Automatic Call Return to return a call to the call waiting number.

Call Forwarding enables you to transfer your incoming calls to another number. Call Forwarding is great for the business person who wants to catch after-hours business calls at home, or for anyone who doesn’t want to miss an important call when away from home.

To forward calls:
1. Lift the receiver and listen for dial tone.
2. Dial “*72”.
3. Listen for dial tone.
4. Dial the number to which calls are to be forwarded.
5. If someone answers, the Call Forwarding is established.
6. If the number is busy or there is no answer, hang up and repeat the procedure.
7. Listen for confirmation tone.

To cancel Call Forwarding:
1. Lift the receiver and listen for dial tone. Then dial “*73”.
2. Listen for a confirmation tone.

Notes:
Once you have activated Call Forwarding, the phone will make one short ring each time a call is forwarded. You can still make outgoing calls from this phone without interfering with incoming calls. However, while you have Call Forwarding activated, you may only receive calls from the number that you have forwarded your calls to. All other calls will be forwarded automatically.

Call Forwarding Busy Line allows calls that reach a busy signal to be forwarded to a preselected telephone number. The activation and deactivation of this feature is controlled by HTC.

Call Forwarding Don’t Answer allows calls that don’t get an answer to be forwarded after a certain number of rings. The activation and deactivation of this feature is controlled by HTC.

Did you ever miss an important call because you forgot to forward your calls before you left home? With Remote Activation of Call Forwarding that will never happen again. With this service you can activate and/or change your Call Forwarding number from a remote location. The feature is deactivated by dialing the access number and personal identification number (PIN) assigned by HTC.

To activate Remote Call Forwarding:
1. Dial 843-646-9979 which is the Remote Activation of Call Forwarding access number.
2. Enter the phone number to be forwarded as well as the assigned PIN.
3. After the confirmation tone, press “*72”.
4. After hearing the second confirmation tone, enter the destination number to which calls are to be forwarded.
5. The phone will ring. Once answered by a person, machine, or voice mail, the call forwarding is set. If the phone is not answered at all, the call forwarding process has not been completed.

To cancel Call Forwarding:
1. Dial 843-646-9979 which is the Remote Activation of Call Forwarding access number.
2. Enter the PIN.
3. Press “*73” and listen for a confirmation tone. Calls are no longer being forwarded.

Call Manager’s online phone management function gives you unprecedented control over when, where and how you receive phone calls. Subscription to Call Manager includes Caller ID Name and Number, Voice Mail Plus, V-Forward, Call Forwarding Busy and Don’t Answer, Do Not Disturb, Anonymous Call Rejection, Selective Call Acceptance, Selective Call Block, Selective Call Forwarding, Selective Ringing, Privacy Defender, and Find Me/Follow Me with Simultaneous Ring. All for just one low price!

Call Waiting lets you know, with a short beep, that another caller is trying to reach you. This feature saves time, and emergency calls can always get through. Plus
Cancel Call Waiting lets you turn off Call Waiting for calls that are too important to interrupt.

To answer the second call without disconnecting the first call:
1. Press the receiver button down for about one second and release it to place your first call on hold. You will automatically be connected with the second caller.

To alternate between calls:
1. By pressing the receiver button and releasing it, you may alternate between calls.
2. Each conversation is private and cannot be heard by the other caller.

To disconnect one person and be connected with the person holding:
1. End the first call by hanging up the phone.
2. Your phone will ring.
3. When you answer it, you’ll be connected to the person holding.

Notes:
If your phone is equipped with a “link”, “tap” or “lightning bolt” button, use this button instead of the receiver button.

To temporarily cancel Call Waiting:
1. Lift the receiver.
2. Listen for the dial tone, then press “*70”.
3. Listen for the second dial tone, then dial the desired telephone number.
4. The Call Waiting feature will be canceled for the length of one call and, when you hang up the phone, the Call Waiting feature will automatically be restored.
5. When subscribing to Three-Way Calling in addition to Call Waiting, you may activate Cancel Call Waiting in the middle of a call by pushing and releasing the receiver button for about one second and, after receiving dial tone, dialing “*70” . You will automatically be reconnected to the person holding.

Notes:
If your phone is equipped with a “link”, “tap” or “lightning bolt” button, use this button instead of the receiver button.

In addition to Call Waiting features, Call Waiting Deluxe lets you see the Call Waiting party’s phone number while you are on an existing call. Call Waiting Deluxe is used in conjunction with the Caller ID feature and uses a special display device located on or next to your phone to allow you to view the call waiting number.

To use Call Waiting Deluxe:
1. A beep tone, that only you hear, lets you know that another call is waiting.
2. After the first beep, the Call Waiting party’s phone number will be displayed.

To answer the second call without disconnecting the first call:
1. Press the receiver button down for about one second and release it to place your first call on hold. You will automatically be connected with the second caller.
2. By pressing the receiver button and releasing it, you may alternate between calls.
3. Each conversation is private and cannot be heard by the other caller.

To disconnect one person and be connected with the person holding:
1. End the first call by hanging up the phone.
2. Your phone will ring.
3. When you answer it, you’ll be connected to the person holding.

Notes:
If your phone is equipped with a “link”, “tap” or “lightning bolt” button, use this button instead of the receiver button.
The Call Waiting Deluxe feature requires subscription to the Caller ID feature. Refer to the Caller ID feature for these requirements. If the person calling you is in an area outside the Caller ID service area, you may not receive the number. If private appears on the screen, the caller may have used the Caller ID Blocking option.

To temporarily cancel Call Waiting Deluxe:
1. Lift the receiver.
2. Listen for the dial tone, then press “*70”.
3. Listen for the second dial tone, then dial the desired telephone number.
4. The Call Waiting Deluxe feature will be canceled for the length of one call and, when you hang up the phone, the Call Waiting Deluxe feature will automatically be restored.
5. When subscribing to Three-Way Calling in addition to Call Waiting Deluxe, you may activate Cancel Call Waiting Deluxe in the middle of a call by pushing and releasing the receiver button for about one second and, after receiving a dial tone, dialing “*70” . You will automatically be reconnected to the person holding.

Notes:
If your phone is equipped with a “link”, “tap” or “lightning bolt” button, use this button instead of the receiver button.
The Call Waiting Deluxe feature requires subscription to the Caller ID feature. Refer to the Caller ID feature for these requirements. If the person calling you is in an area outside the Caller ID service area, you may not receive the number. If private appears on the screen, the caller may have used the Caller ID Blocking option.

Call Wake Up/Reminder Call provides you with your own wake up or time reminder service 24 hours a day. Simply enter a special code and the time to be called…and relax!

To enable an individual Wake Up/Reminder Call through the handset:

1. Press “*310”.
2. Listen for the prompt to dial the desired time.
3. Enter the preferred time in 24-hour clock format, then press #.
4. An announcement will confirm that the time has been set, an option to cancel will also be provided.

To check an individual Wake Up/Reminder Call through the handset:
1. Press “*313”.

To disable one individual Wake Up/Reminder Call through the handset:
1. Press “*312”.

To disable all individual Wake Up/Reminder Call through the handset:
1. Press “*311”.

To enable a regular Wake Up/Reminder Call through the handset:

1. Dial “*314”.
2. Listen for the prompt to dial the desired time.
3. Enter the preferred time in 24-hour clock format, followed by “*”.
4. Listen for the prompt to select a repeat reminder option.
– Press “1” to be reminded every Monday.
– Press “2” to be reminded every Tuesday.
– Press “3” to be reminded every Wednesday.
– Press “4” to be reminded every Thursday.
– Press “5” to be reminded every Friday.
– Press “6” to be reminded every Saturday.
– Press “7” to be reminded every Sunday.
– Press “8” to be reminded every weekday.
– Press “9” to be reminded every day.
5. Then press “#” after selecting your reminder option.
6. An announcement will confirm that the reminder has been set, an option to cancel will also be provided.

To check a regular Wake Up/Reminder Call through the handset:
1. Press “*317”.

To disable one regular Wake Up/Reminder Call through the handset:
1. Press “*316”.

To disable all regular Wake Up/Reminder Call through the handset:
1. Press “*315”.
  
Notes:
Regular reminders conflict if they are set for the same time and if their repeat option has a day in common. It is not possible to configure conflicting regular reminders.

Caller ID Blocking allows you to keep your phone number private and secure by restricting its display temporarily                or permanently on the called party’s phone. Caller ID Blocking can be obtained on a “per call” or a “per line” basis.

Caller ID Blocking Per Call:
Temporarily prevent the transmission of your phone number on a per call basis through the use of an activation code prior to each call. This feature is available at no charge, but must be activated prior to each call.

To activate Caller ID Blocking per call:
1. Press “*67”.
 
Caller ID Blocking Per Line:
Prevent the transmission of your phone number on all outgoing calls placed from your phone.

To temporarily suppress Caller ID Blocking:
1. Press “*82”. Your number will be identified to the person you are calling.
2. After the call is disconnected Caller ID Blocking will automatically be restored.

Caller ID lets you see the calling party’s phone number before answering a call. A special display device located on or next to your phone is required to allow you to view the calling number. Your Caller ID display device can store the phone numbers of people who called, even while you were out. You can easily review these numbers and return the calls you want to.

With Call Name Delivery, you’ll see the calling party’s name and phone number before answering a call. A special device located on or next to your phone is required to allow you to view the calling name and number. With Call Name Delivery, the display device can store the names and numbers of the calls you missed while you were out.

Customer Originated Trace enables you to trace an offensive or annoying call by dialing a special code as soon as you hang up. The
information is routed to a printer at HTC’s office for submission to the appropriate law enforcement agency.

To use Customer Originated Trace:
1. Hang up after receiving the annoying call.
2. Lift the receiver and listen for dial tone.
3. Press “*57”, then listen for the confirmation tone or announcement.
4. Press “1” to trace the last call received, then hang up.

The number you traced will be recorded at HTC. If you decide to pursue the matter, call HTC’s Credit Department at 365-2153 and request that a record of the call be printed. The caller’s phone number, as well as the time and date of the call will be given to law enforcement officials. You may be required to file a formal complaint with the proper authorities.

Notes:

You must activate Customer Originated Trace immediately after the offending call. If you delay taking action and receive a
subsequent incoming call, Customer Originated Trace will not trace the correct number. If a call waiting tone is received during a call that is to be traced, tracing will occur on the call waiting party rather than the original calling number. The calling party must be within the Customer Originated Trace area. The number may not be available if the caller is calling from a wireless phone or calling from a landline phone within the same exchange.

Do Not Disturb helps you during those times you wish you could stop the phone from ringing. Do Not Disturb lets you notify callers when you want a little privacy. Do Not Disturb is used together with Selective Call Acceptance.

To activate Do Not Disturb:
1. Lift the receiver and listen for dial tone.
2. Dial “*78”.
3. Listen for confirmation tone, hang up.

To cancel Do Not Disturb:
1. Lift the receiver and listen for dial tone.
2. Dial “*79”.
3. Listen for confirmation tone, hang up.

Enhanced Contacts Listing lets you access your contacts from anywhere – and synchronize them with Outlook and other mobile devices. Assign contacts to groups, click-to-dial from contacts or dial-by-name. You can even click-to-email. Enhanced Contacts Listing is free of charge. Access this feature by logging into My Account.

With Find Me/Follow Me with Simultaneous Ring, your incoming calls can “find you” at multiple phone numbers, one after another. If you don’t pick up at one number, the call will move on to the next. Or you can have them all ring at the same time. This feature can be modified from anywhere at anytime via online management.

Help Line lets you choose one telephone number you wish to reach simply by picking up your telephone receiver. An emergency, family, or business number – local or long distance – will be programmed on your line by HTC. If you select a long distance number, all Help Line calls will be billed at the direct dial long distance rate. Just tell us what number you would like to reach without dialing, and we will put it on your line. Then, if you do not dial within 16 seconds of lifting your phone receiver, the number you chose will be automatically and accurately dialed for you.

To change your preprogrammed Help Line number, contact HTC (a service charge may be required).

To use Help Line:
1. Lift the receiver.
2. Wait for the time delay period to elapse (approximately 16 seconds).
3. Listen for the ring or a busy signal as the predetermined telephone number is automatically dialed.
4. If busy or no answer, it will be necessary to repeat the above procedures.

With Live Message Screening you have the ability to “listen in” or “pick up” on a message as it’s being left by a caller.

To use Live Message Screening:
1. When Live Message Screening is activated and your call is diverted to Voice Mail, your phone will ring with a different tone.
2. You can pick up the receiver and listen to the message the caller is recording.
3. If you would like to answer the phone, press “1”, and your call will be connected. At no point is the caller aware that you were listening in.

Notes:
Requires subscription to Voice Mail. Live Message Screening is not available to group account subscribers, in order to prevent members of the group hearing Voice Mail messages that are not intended for other members of that group.

Manage My Phone is the most easy and accessible way to find and manage the calling features that enhance your phone service. Now you have the freedom and flexibility to activate and deactivate features or switch the phone numbers assigned to them at any time you want – from any place you might be. With online management, the control of these features is as close and convenient as the nearest keyboard no matter how you choose to connect to the Internet. Best of all, the service is free. Simply select Manage My Phone when you log into My Account.

With Manage My Phone you can:
– View your call history.
– Program call forwarding, acceptance and rejection numbers.
– Activate and deactivate calling features.

Personal Ringing enables everyone in your home or office will know who the call is for before they answer by simply listening for their own special ring. This saves time, adds privacy, and is great for families with teenagers!  HTC will assign a second number for your telephone line. When someone calls this number, it will have a distinctive ring to distinguish it from calls to your regular telephone number.

Privacy Defender with Anonymous Call Rejection will intercept unidentified calls such as “Unavailable” or “Out of Area.” The unidentified callers will hear a recording that says “This number does not accept calls from telemarketers. Please hang up and place this number on your do-not-call list. If you are not a telemarketer, press the number 1 to be connected.” This is all performed before your phone rings, which means a substantial reduction in unwanted calls.

Privacy Defender prompts callers to confirm that they are not Telemarketers.  To avoid the need to answer these calls, the Telemarketer Call Screening option within Privacy Defender allows you to screen them.

To use Privacy Defender:
1. Whenever someone calls you Telemarketer Call Screening does not put the call through to you directly. Instead, the caller is asked to press “8” to confirm that he or she is not a telemarketer. 
2. If the caller does not press “8”, Telemarketer Call Screening does not accept the call and your phone does not ring. An announcement informing the caller that this number does not accept telemarketing calls will be played.
3. If the caller presses “8”, Telemarketer Call Screening accepts the call.

Anonymous Call Screening prompts callers with anonymous numbers to record their names and gives you the opportunity to accept or reject the call.  To avoid the need to answer these calls in order to find out who is calling, the Anonymous Call Screening option within Privacy Defender allows you to screen them.

To use Anonymous Call Screening:
1. Whenever someone calls you from an anonymous number, Anonymous Call Screening does not put the call through to you directly. Instead, the caller hears an announcement explaining that you do not accept unidentified calls, and is asked to say his or her name so that it can be recorded.
2. If the caller records a name, Anonymous Call Screening then rings your phone. When you pick up, you hear a message giving you the recorded name.
3. You can then decide whether to speak to the caller.
4. You will be given the option to accept the call, play a message informing the caller that you do not accept telemarketing calls and ask to be removed from his or her calling list, or play a message informing the caller that you cannot accept the call at this time and ask to call you back later.
5. If you do not select any of the previous options, Anonymous Call Screening disconnects the call after a short timeout.  If the caller does not record a name, Anonymous Call Screening does not accept the call and your phone will not ring.

Yes. You can specify a personal bypass code that overrides Anonymous Call Screening, which you can give to people from whom you are happy to accept calls. Instead of recording a name, someone who knows this code can simply press the * key followed by this code (a three-digit number) to be put through to your phone.

To manage your bypass code:
1. Press “2” at the Main Menu to access your bypass code functions.
2. Press “1” to set a new bypass code.
3. Press “9” to leave the previous bypass code unchanged.
4. Press “2” to clear the bypass code.

Selective Call Acceptance works alongside Do Not Disturb. It allows the subscriber to block his or her line temporarily to prevent incoming calls, but to allow calls from up to 12 pre-programmed numbers through. Outgoing calls can still be made as normal, but incoming calls from numbers that are not on the subscriber’s configured list are not connected; instead, the caller hears an announcement that the subscriber is not currently accepting calls.

To use Selective Call Acceptance:
1. Press *64.
2. Listen to instructions that guide you through the steps of how to turn Selective Call Acceptance on or off and how to make changes to your Selective Call Acceptance list.
3. Press “0” to repeat the instructions.
4. Press “1” to review the numbers on your list.
5. Press “3” to turn Selective Call Acceptance off.
6. Press “#” to add a number to your list.
7. Press “*” to delete a number from your list.

Selective Call Block allows you to block calls from up to twelve phone numbers placed on your Selective Call Block list. You can add an offensive caller to your list without knowing the caller’s phone number. Calls from phone numbers on the list are sent to an announcement that informs the caller that you are not receiving calls at this time.

To use Selective Call Block:
1. Press “*60”.
2. Listen to instructions that guide you through the steps of how to turn Selective Call Block on or off and how to make changes to your Selective Call Block list.
3. Press “0” to repeat the instructions.
4. Press “1” to review the numbers on your list.
5. Press “3” to turn Selective Call Block on/off.
6. Press “#” to add a number to your list.
7. Press “*” to delete a number from your list, enter the number, then press “*” again.

To block the last person that called you:
1. Press “#”
2. Dial “01”
3. Press “#” again.

With Selective Call Forwarding, you can have only your most important calls forwarded to any number you select. You can create your own list of ten phone numbers that are to be forwarded when they call you. All other calls will ring your phone in the normal fashion.

To use Selective Call Forwarding:
1. Press “*63”.
2. Listen to instructions that guide you through steps of how to turn Selective Call Forwarding on or off, make changes to your Selective Call Forwarding list and on entering the call forward-to number.
3. Press “0” to repeat the instructions.
4. Press “1” to review the numbers on your list.
5. Press “3” to turn Selective Call Forwarding on/off.
6. Press “#” to add a number to your list.
7. Press “*” to delete a number from your list

With Selective Ringing/Call Waiting, you can identify special and important calls from individuals whose phone numbers appear on your select list of callers. You will hear a distinctive ring when receiving a call from one of the twelve numbers you included on your list. If you have Call Waiting service, you will hear a distinctive call waiting tone whenever someone on your list calls you while you’re on the phone.

To use Selective Ringing/Call Waiting:
1. Press “*61”.
2. Listen to voice instructions that will guide you through steps of how to turn Selective Ringing/Call Waiting on or off and make changes to your Selective Ringing/Call Waiting list.
3. Press “0” to repeat the instructions.
4. Press “1” to review the numbers on your list.
5. Press “3” to turn Selective Ringing/Call Waiting on/off.
6. Press “#” to add a number to your list.
7. Press “*” to delete a number from your list

To recognize the ringing pattern or call waiting tones when Selective Ringing/Call Waiting is turned on:
1. When receiving calls from any number on your list a distinctive ringing or call waiting tone will be heard.
2. When receiving calls from other numbers, normal ringing or call waiting tones will be heard.

With Speed Calling your phone can remember and dial frequently called numbers and emergency numbers. It’s faster and more
accurate. There are two Speed Calling options available:

Speed Calling 8:
Allows you to press one button to reach 8 of your frequently called numbers.

Speed Calling 30:
Allows you to press two buttons to reach 30 different phone numbers.

To use Speed Calling:
1. Lift the receiver and listen for dial tone.
2. Dial the speed number associated with the telephone number of the person you wish to call, followed by the “#” key.

To enter or change your Speed Calling 8 list:
1. Lift the receiver, and listen for dial tone.
2. Dial “*74”.
3. Listen for the second dial tone.
4. Dial one of eight speed numbers (2 through 9)
5. Dial the telephone number that speed number will be used for.
6. Press the “#” button or wait for four seconds to indicate the end of this number.
7. Listen for a confirmation tone, hang up.

To enter or change your Speed Calling 30 list.
1. Lift the receiver, and listen for dial tone.
2. Dial “*75”.
3. Listen for second dial tone.
4. Dial one of thirty speed numbers (20 through 49).
5. Dial the telephone number that speed number will be used for.
6. Press the “#” button or wait four seconds to indicate the end of this telephone number.
7. Listen for a confirmation tone, hang up.

Now you can turn an everyday, two-way phone call into a three-way conversation. This is great for family get-togethers as well as business calls. Three-Way Calling lets you talk to two people in two different locations at the same time!  Available On A Pay-Per-Use Basis.

To add a third person to your call:
1. Press the receiver button down for about one second. This will place the first call on hold.
2. Listen for dial tone, then dial the telephone number of the third person to be added to the conversation.
3. When the third person answers, you may talk privately before adding the person on hold. To add the person holding, press the receiver button for approximately one second, release, and Three-Way Calling is now established.
4. If the third person does not answer or you receive a busy signal, push the receiver button down to disconnect the third person. If the busy signal continues, press the receiver button down and release once more.
5. If either party hangs up, you can continue to talk to the person remaining on the line.

Notes:
If your phone is equipped with a “link”, “flash”, “tap” or “lightning bolt” button, use this button instead of the receiver button.

HTLD Consumer Services Agreement

A tariff is a detailed, regulatory document a company files with a regulatory agency describing the rates, terms and conditions of the services it provides. In the past, companies that provided interstate (state-to-state) and international long distance services had to file these tariffs with the Federal Communications Commission (FCC). Because state-to-state and international long distance calling is now a competitive service, the FCC has eliminated the requirement for filing state-to-state and international tariffs.

Beginning July 31, 2001, state-to-state and international toll service will be provided without filing tariffs with the FCC. Each long distance company must provide service details available to the public by posting its rates, terms and conditions on their website (if the company has a website) and at their place of business. Generally, long distance services will now be provided on the basis of a contract or agreement similar to the provision of other business services.

No. You will receive a Long Distance Services Agreement, which in brief, layperson-language sets forth the current rates, terms and conditions of providing your state-to-state and international long distance toll services. The Long Distance Services Agreement will have no impact on your service, the price you pay, or your ability to make changes. You do not have to take any action. Use of and payment for the service confirms your acceptance of the Agreement. The copy you receive is provided for informational purposes only to confirm the rates, terms and conditions under which service is provided.

There is no change in the Agreement from the current terms and conditions filed with the FCC with the exception of the requirement in the Agreement for advance notification of increases in rates and changes in terms and conditions.

The Rates, Terms and Conditions Document is a detailed document describing all of the company’s state-to-state and international service offerings and the related rates, terms and conditions for those services from which the Long Distance Services Agreement was prepared. Because the Agreement is a summary document providing administrative convenience to the consumer, it incorporates the Rates, Terms and Conditions Document by reference. Consumers may review the Rates, Terms and Conditions at the company (3480 Highway 701 North, Conway, South Carolina, 29528) should it be desired. Your account representative can make the Rates, Terms and Conditions available.

No, the Agreement only applies to state-to-state and international long distance toll services. The toll services for calling within a state are still covered by tariffs filed at the state utility commissions that govern rules for rates, terms and conditions. The new detariffing approach only applies to state-to-state and international toll services.

The new Long Distance Service Agreement provides protection under the full range of state laws, including those governing contracts, consumer protection and deceptive practices. One example would be that your long distance company would be required to provide prior notice before it changes any rates. You are assured a long distance company will make its rates, terms and conditions available for your information on a continuing basis.

You are protected by the new Long Distance Services Agreement and the state contract laws that apply as noted in the previous item.

You may call your account representative, who is most familiar with your specific services, or you may call our office at 843-365-2154 and our personnel will help by answering any questions you have.