Complete the following steps.

  • Press and hold down the TV button until all the lights at the top of remote begin to flash.
  • Release TV button (it should remain lit)
  • Enter the 4 digit “Manufacturer’s Code” for TV and press power (refer to Motorola Remote Control User Guide PDF for the TV codes).
    • If TV powers off, remote is programmed.
    • If TV does not power off, repeat steps 1-3.
  • Once remote is programmed, press CABLE button to resume in cable mode.

Complete the following steps.

  • Press and hold down the function button (Audio, DVD/VCR, TV) for the device to be programmed until all the lights at the top of remote begin to flash.
  • Release device button (it should remain lit)
  • Press and release POWER
  • Press and release UP arrow (above OK).
  • Continue to press and release the UP arrow until the device being programmed powers off
  • Each time the UP arrow button is pressed, the device button for equipment will blink. If that particular device button stops blinking and the CABLE button starts blinking, this means the remote has gone through all codes and none has worked. 
    • Once the device powers off, press the OK button to save code.
    • Do not press the UP arrow button after device has powered off. In the event, UP arrow button is pressed after device has powered off, correct code will be skipped and process will need to be repeated. 
  1. After pressing the OK button to save code, press the POWER button and equipment should power on.
  2. Press CABLE to resume in cable mode.

Complete the following steps.

  • Press and hold the TV button until all of the lights at the top of the remote begin to flash.
  • Release the TV button (it should remain lit)
  • Press the VOLUME UP button once
  • Press the CABLE button once.
  • Volume function is now locked to the TV

Complete the following steps.

  • Press and hold down the CABLE button until all the lights at the top of remote begin to flash.
  • Release the CABLE button (it should remain lit)
  • Enter code 0000 and press the red POWER
  • The Cable Set-top box should power off.
  • Press Power to power the Cable Set-top back on.
    Please tell us what we can do to improve our support pages.