Complete the following steps.

  • Press and hold TV and OK buttons simultaneously for 3 seconds.
  • When released the TV button will remain lit
  • Enter 3 digit “Manufacturer’s Code” for the device (Refer to the PHAZR-5 User Guide PDF for your TV’s code).
    • If it is the correct code, TV will power off.
    • If TV does not power off, repeat step 2 and proceed to next code.
  • When the correct code is entered, TV will power off.
  • When TV powers off, press TV button again to save the code.

Complete the following steps.

  • Press and hold TV and OK buttons simultaneously for 3 seconds.
    • When released the TV button will remain lit
  • Press the CHANNEL UP button repeatedly until the TV powers off.
  • Press the TV button to save the code.

Complete the following steps.

  • Press and hold CABLE and OK buttons simultaneously for 3 seconds.
    • When released the CABLE button will remain lit
  • Press VOLUME UP button once.
  • Press TV button.
  • Press CABLE button to put remote back in cable mode.

Complete the following steps.

  • Press and hold CABLE and OK buttons simultaneously for 3 seconds.
    • When released the CABLE button will remain lit
  • Enter 3 digit “Manufacturer’s Code” (refer to the list below)
    • 002
    • 111
    • 148
  • If the correct code is entered, the Cable Set-top box will power off & you should proceed to step 6.
  • If the Cable Set-top box does not power off, repeat step 2 by trying another code, proceeding to the next code.
  • When the Cable Set-top box powers off, the remote control is programmed.
  • Press CABLE button again to save the code.

Complete the following steps.

  • Press and hold ON/OFF and OK buttons simultaneously for 3 seconds.
    • When released the CABLE button will remain lit.
  • Press TV
  • Press POWER
  • Press CABLE
  • Press POWER
  • CHANNEL UP
    • Remote should now power the TV and the Cable Set-top off/on with a single press of the System On/Off
    Please tell us what we can do to improve our support pages.