Complete the following steps.

  • Turn the TV on
  • Press the Device button (TV, DVD, etc.)
  • Press and hold SETUP (the LED will blink twice)
  • Enter the 5 digit “Manufacturer’s Code” for the device (Refer to the Titan User Guide PDF for the TV codes)
  • Press the POWER button
    • The Device should power off
    • If it does not power off, repeat steps 2 & 3, trying each code for the brand until one works.

Complete the following steps.

  • Turn device on
  • Press the Device button (TV, DVD, etc.)
  • Press and hold SETUP (the LED will blink twice)
  •  Enter 9-9-1 (the LED will blink twice)
  • Designate Device type:
    • Press 1 for TV
    • Press 2 for DVD/VCR
    • Press 3 for Audio
  • Press POWER button.
  • Press CHANNEL UP repeatedly until the device turns off.
  • Press SETUP when device turns off.

To program the Master Power key:

Complete the following steps.

  • Press the STB button.
  • Press and hold SETUP. The mode LED blinks twice.
  • Enter 9-9-5. The mode LED blinks twice.
  • Press POWER once.
  • Press TV once.
  • Press POWER once.
  • Press STB once.
  • Press POWER once.
  • Press and hold SETUP until the mode LED blinks twice.

Complete the following steps.

  • Press the STB button.
  • Press and hold SETUP until the mode LED blinks twice.
  • Enter 9-9-5. The mode LED blinks twice.
  • Press POWER once.
  • Press and hold SETUP until the mode LED blinks twice.
    HTC is continually striving to improve your customer experience while using the Support site. Please complete the comments portion below to tell us what was helpful or if you experienced a problem so we can make changes to improve our site.