Titan Remote Control
How do I program my remote control to the TV with codes?
Complete the following steps.
- Turn the TV on
- Press the Device button (TV, DVD, etc.)
- Press and hold SETUP (the LED will blink twice)
- Enter the 5 digit “Manufacturer’s Code” for the device (Refer to the Titan User Guide PDF for the TV codes)
- Press the POWER button
- The Device should power off
- If it does not power off, repeat steps 2 & 3, trying each code for the brand until one works.
How do I program my remote control to the TV without codes?
Complete the following steps.
- Turn device on
- Press the Device button (TV, DVD, etc.)
- Press and hold SETUP (the LED will blink twice)
- Enter 9-9-1 (the LED will blink twice)
- Designate Device type:
- Press 1 for TV
- Press 2 for DVD/VCR
- Press 3 for Audio
- Press POWER button.
- Press CHANNEL UP repeatedly until the device turns off.
- Press SETUP when device turns off.
How do I program the master power button on my remote control?
To program the Master Power key:
Complete the following steps.
- Press the STB button.
- Press and hold SETUP. The mode LED blinks twice.
- Enter 9-9-5. The mode LED blinks twice.
- Press POWER once.
- Press TV once.
- Press POWER once.
- Press STB once.
- Press POWER once.
- Press and hold SETUP until the mode LED blinks twice.
How do I clear the master power button programming from my remote control?
Complete the following steps.
- Press the STB button.
- Press and hold SETUP until the mode LED blinks twice.
- Enter 9-9-5. The mode LED blinks twice.
- Press POWER once.
- Press and hold SETUP until the mode LED blinks twice.
